|
|
|
National Stock Number:
4330-00-418-0197
Federal Supply Class:
4330
National Item Identification Number:
004180197
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 3007 | 06840 | BENDIX CORP THE | | 3007 | 90005 | PUROLATOR FACET INC. | | 576392 | 03104 | TELEDYNE BROWN ENGINEERING, INC. | | B3007 | 06840 | BENDIX CORP THE | | 576392 | 30715 | SABRELINER CORP | | B3007 | 54465 | WARNER AND SWASEY CO SHEFFIELD MEASUREMENT DIV SUB OF CROSS AND TRECKER CORP | | B3007 | 90005 | PUROLATOR FACET INC. |
|
Techincal Specification:
| STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | BODY DIAMETER | 3.500 INCHES NOMINAL | | BODY OVERALL LENGTH | 6.125 INCHES NOMINAL | | MATERIAL | PAPER FILTERING MEDIUM | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | DESIGN TYPE | NONREUSABLE | | FILTRATION RATING IN MICRONS | 10.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND | | 275.0 DEG FAHRENHEIT MAXIMUM | | DIFFERENTIAL PRESSURE | 75.0 POUNDS PER SQUARE INCH | | FILTERING SURFACE AREA | 940.0 SQUARE FEET |
|
|