|
|
|
National Stock Number:
4330-00-406-3898
Federal Supply Class:
4330
National Item Identification Number:
004063898
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 3040PL0639227 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 4330PL0639227 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | AC9516F1 | 18350 | PALL AEROPOWER CORPORATION | | MIL-F-27656 | 3U011 | SWIFT FILTERS, INC. | | AC-9516F-1 | 60047 | PALL AEROPOWER CORP SUB OF PALL CORP MECTRON INDUSTRIES DIV | | AC9516F1 | C0202 | PALL GMBH | | MIL-F-27656 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DESIGN TYPE | LIMITED | | DIFFERENTIAL PRESSURE | 100.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 3.800 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 1.235 INCHES MINIMUM AND 1.265 INCHES MAXIMUM | | BODY OVERALL LENGTH | 12.927 INCHES MINIMUM AND 13.092 INCHES MAXIMUM | | FILTRATION RATING IN MICRONS | 3.0 ABSOLUTE | | FLOW DIRECTION | OUTSIDE IN | | FSC APPLICATION DATA | TEST STAND,HYDRAULIC PUMPING UNIT,AIRCRAFT | | III STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | SPECIAL FEATURES | USED ON GRUMMAN AIRCRAFT,MODEL A10 | | TEMP RATING | 50.0 DEG FAHRENHEIT MINIMUM AND 160.0 DEG FAHRENHEIT MAXIMUM | | TEST DATA DOCUMENT | 81349-MIL-F-S7656 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|