|
|
|
National Stock Number:
4330-00-402-2457
Federal Supply Class:
4330
National Item Identification Number:
004022457
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 3200768-1 | 11243 | COSMODYNE, LLC | | 3200768-1CP | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG |
|
Techincal Specification:
| BODY OVERALL LENGTH | 5.970 INCHES MINIMUM AND 6.030 INCHES MAXIMUM | | CRITICALITY CODE JUSTIFICATION | ZZZY | | DESIGN TYPE | REUSABLE | | DIFFERENTIAL PRESSURE | ERR-060 | | FILTERING MEDIA DESIGN | MESH SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 2.0 NOMINAL | | FLOW DIRECTION | INSIDE OUT | | LARGEST OUTSIDE DIAMETER | 1.035 INCHES MINIMUM AND 1.045 INCHES MAXIMUM | | MATERIAL | STEEL COMP 304L FILTERING MEDIUM | | SMALLEST OUTSIDE DIAMETER | 0.655 INCHES MAXIMUM | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D | | STYLE DESIGNATOR | CONICAL W/OUT CONTAINER | | TAPERED HOLE MAJOR DIAMETER | 0.500 INCHES MINIMUM | | TAPERED HOLE MINOR DIAMETER | 0.500 INCHES MINIMUM |
|
|