|
|
|
National Stock Number:
4330-00-394-2849
Federal Supply Class:
4330
National Item Identification Number:
003942849
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 2278L3 | 15472 | SOLVENTUM PURIFICATION INC. | | G78L3 | 15472 | SOLVENTUM PURIFICATION INC. |
|
Techincal Specification:
| STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | BODY DIAMETER | 2.625 INCHES NOMINAL | | BODY INSIDE DIAMETER | 1.000 INCHES NOMINAL | | BODY OVERALL LENGTH | 9.750 INCHES NOMINAL | | MATERIAL | CELLULOSE AND | | PLASTIC PHENOLIC FILTERING MEDIUM | | FILTERING MEDIA DESIGN | MOLDED SINGLE FILTERING MEDIA RESPONSE | | DESIGN TYPE | NONREUSABLE | | FLOW DIRECTION | OUTSIDE IN | | MEDIA FOR WHICH DESIGNED | WATER | | TEMP RATING | 250.0 DEG FAHRENHEIT NOMINAL | | DROP PRESSURE | 2.0 POUNDS PER SQUARE INCH | | DIFFERENTIAL PRESSURE | 30.0 POUNDS PER SQUARE INCH | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | SPECIAL FEATURES | ELEMENT GROOVED ON OD; 50.0 MICRON FILTER ELEMENT |
|
|