| STYLE DESIGNATOR | TEE TYPE (HYDRAULIC) |
| BODY LENGTH | 3.820 INCHES NOMINAL |
| BODY WIDTH | 1.880 INCHES NOMINAL |
| BODY HEIGHT | 7.600 INCHES NOMINAL |
| DISTANCE FROM BOTTOM OF BODY TO CENTER OF INLET | 6.760 INCHES NOMINAL |
| MATERIAL | ALUMINUM BODY |
| PAPER AND |
| RESIN SYNTHETIC FILTERING MEDIUM |
| RUBBER BUNA N SEAL |
| FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE |
| DESIGN TYPE | REUSABLE |
| FILTERING ELEMENT QUANTITY | 1 |
| FILTRATION RATING IN MICRONS | 10.0 NOMINAL |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON |
| MAXIMUM OPERATING PRESSURE | 100.0 POUNDS PER SQUARE INCH |
| TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND |
| 250.0 DEG FAHRENHEIT MAXIMUM |
| DROP PRESSURE | 7.0 POUNDS PER SQUARE INCH |
| FIRST INTAKE CONNECTION TYPE | THREADED INTERNAL PIPE HEAD SIDE |
| FIRST INTAKE THREAD SERIES DESIGNATOR | NPT |
| FIRST INTAKE NOMINAL THREAD SIZE | 0.750 INCHES |
| FIRST INTAKE THREAD DIRECTION | RIGHT-HAND |
| FIRST DISCHARGE CONNECTION RELATIONSHIP TO INTAKE CONNECTION | IDENTICAL TO FIRST INTAKE CONNECTION |
| MOUNTING TYPE | INLET CONNECTION AND |
| OUTLET CONNECTION LINE |
| THREADED HOLE TOP |
| MOUNTING HOLE QUANTITY | 2 |
| DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.880 INCHES NOMINAL |
| MOUNTING FACILITY THREAD SERIES DESIGNATOR | UNC |
| MOUNTING FACILITY NOMINAL THREAD SIZE | 0.250 INCHES |
| FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW |
| FEATURES PROVIDED | BY-PASS VALVE AND |
| DIFFERENTIAL PRESSURE INDICATOR |
| SPECIAL FEATURES | SPIN-ON TYPE ELEMENT; 5 PSI BYPASS; PRESSURE GAUGE ON INDICATOR PORT NO. 3 |