|
|
|
National Stock Number:
4330-00-136-4734
Federal Supply Class:
4330
National Item Identification Number:
001364734
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 3GLDM | 00736 | FALLS FILTRATION TECHNOLOGIES, INC. | | FD0404200-11 | 1CY93 | LARNAN FILTEN CORP DBA ADVANCED PRODUCTS CORP | | UM03TDMGL | 00736 | FALLS FILTRATION TECHNOLOGIES, INC. | | FT22200-10 | 1CY93 | LARNAN FILTEN CORP DBA ADVANCED PRODUCTS CORP |
|
Techincal Specification:
| STYLE DESIGNATOR | SUMP TYPE | | BODY DIAMETER | 5.000 INCHES NOMINAL | | BODY OVERALL LENGTH | 7.250 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | NPT | | NOMINAL THREAD SIZE | 2.000 INCHES | | MATERIAL | STEEL BODY | | PLASTIC CELLULOSE ACETATE FILTERING MEDIUM | | STEEL FRAME | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | DESIGN TYPE | REUSABLE | | FLOW DIRECTION | INSIDE OUT | | MEDIA FOR WHICH DESIGNED | AIR | | TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND | | 300.0 DEG FAHRENHEIT MAXIMUM | | FACE VELOCITY | 95.0 FEET PER MINUTE | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | SPECIAL FEATURES | DRY TYPE |
|
|