| DISPLACEMENT TYPE | CONSTANT |
| SHAFT ROTATION DIRECTION | CLOCKWISE AND |
| COUNTERCLOCKWISE |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 246.0 |
| CONSTANT DISPLACEMENT PER REVOLUTION | 18.710 CUBIC INCHES |
| CONNECTION TYPE | INLET AND |
| OUTLET AND |
| DRAIN |
| MOUNTING TYPE | FLANGE |
| CONNECTION QUANTITY | 3 |
| CONNECTION DESIGN | THREADED |
| DRIVE SHAFT TYPE | KEYED AND |
| THREADED |
| MATERIAL | STEEL HOUSING |
| MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3000PSI |
| TORQUE LOAD RATING | 235.0 INCH-POUNDS |
| CONNECTION GOVERNMENT SPEC/STD | SAE J1926 |
| THREAD SIZE | 0.875-14 AND |
| 0.4375-20 |
| SCREW THREAD SERIES DESIGNATOR | UNF |
| THREAD LOCATION | INTERNAL |
| THREAD DIRECTION | RIGHT-HAND |
| SHAFT DIAMETER | 1.2605 INCHES NOMINAL |
| KEY HEIGHT | 0.3132 INCHES NOMINAL |
| KEY LENGTH | 1.7720 INCHES NOMINAL |
| KEY WIDTH | 0.3930 INCHES NOMINAL |
| SHAFT THREAD SIZE | 0.3150-20.32 |
| SHAFT THREAD DIRECTION | RIGHT-HAND |
| SHAFT SCREW THREAD LENGTH | 0.850 INCHES NOMINAL |
| SHAFT PROTRUSION LENGTH | 2.220 INCHES NOMINAL |
| MOUNTING HOLE QUANTITY | 4 |
| MOUNTING BOLT CIRCLE DIAMETER | 4.190 INCHES NOMINAL |
| MOUNTING HOLE DIAMETER | 0.535 INCHES NOMINAL |
| ACCESSORY COMPONENTS AND QUANTITY | MAGNETIC SPEED PICK-UP WITH SHROUD CONNECTOR 1 |
| SPECIAL FEATURES | M8 X 1.25-6H, 0.85IN. DEEP INTERNAL THREAD IN END OF OUTPUT SHAFT; USED IN CEMENT BIN ASY OF PAVEMENT REPAIR SYSTEM |