| DRIVE SHAFT TYPE | SPLINED, STRAIGHT INTERNAL |
| CONNECTION GOVERNMENT SPEC/STD | INLET/OUTLET PER MS33649-16,DRAIN PER MS33649-6 |
| CONNECTION QUANTITY | 3 |
| CONNECTION DESIGN | THREADED |
| CONSTANT DISPLACEMENT PER REVOLUTION | 1.519 CUBIC INCHES |
| CONNECTION TYPE | INLET AND OUTLET AND DRAIN |
| DISPLACEMENT TYPE | CONSTANT |
| MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3000PSI AT MINUS 2 DEG C TO PLUS 32 DEG C |
| MOUNTING BOLT HOLE SPACING | 4 .344IN. DIA. MTG. ON 3.536 IN. BY 3.536 IN. MTG. CENTERS |
| MOUNTING HOLE DIAMETER | 0.344 INCHES NOMINAL |
| MOUNTING HOLE QUANTITY | 4 |
| MOUNTING TYPE | FLANGE |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 3750.0 |
| SPLINE LENGTH | 0.910 INCHES NOMINAL |
| SPLINE QUANTITY | 16 |
| THREAD LOCATION | INTERNAL |
| TORQUE LOAD RATING | 725.0 INCH-POUNDS |