| DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| CONNECTION DESIGN | THREADED |
| CONNECTION GOVERNMENT SPEC/STD | MS33649-12 AND MS33649-16 |
| CONNECTION TYPE | OUTLET AND INLET |
| CONNECTION QUANTITY | 2 |
| CONSTANT DISPLACEMENT PER REVOLUTION | 0.380 CUBIC INCHES |
| DISPLACEMENT TYPE | VARIABLE |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 1000.0 |
| MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3000PSI AT MINUS 67 DEG F TO PLUS 275 DEG F |
| MOUNTING BOLT CIRCLE DIAMETER | 5.000 INCHES NOMINAL |
| MOUNTING BOLT HOLE SPACING | 3.536 IN. BY 3.536 IN. |
| MOUNTING HOLE DIAMETER | 0.339 INCHES MINIMUM AND 0.354 INCHES MAXIMUM |
| MOUNTING HOLE QUANTITY | 4 |
| MOUNTING TYPE | FLANGE |
| PITCH DIAMETER | 0.600 INCHES NOMINAL |
| SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT (UNJ) |
| SHAFT PROTRUSION LENGTH | 0.857 INCHES NOMINAL |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
| TORQUE LOAD RATING | 38.0 INCH-POUNDS OR 140.0 INCH-POUNDS |
| SPLINE LENGTH | 0.817 INCHES NOMINAL |
| SPLINE MAJOR DIAMETER | 0.640 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| SPLINE PITCH | 20/40 |
| SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| SPLINE QUANTITY | 12 |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LOCATION | INTERNAL OVERALL |
| THREAD SIZE | 1.312-12 AND 1.062-12 |