| END CONNECTION DESIGN | STRAIGHT FIRST END |
| END CONNECTION DESIGN | STRAIGHT SECOND END |
| BURST TEST PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | PLAIN OPTIONAL END FIRST END |
| CONNECTION STYLE | PLAIN SECOND END |
| CONNECTION TYPE | THREADED EXTERNAL PIPE SECOND END |
| CONNECTION TYPE | THREADED INTERNAL PIPE FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| HYDROSTATIC TEST PRESSURE | 500.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 1.500 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED POLYESTER CORD OR 1ST LAYER BRAIDED POLYESTER CORD OR 1ST LAYER ARAMID FIBERS OR 2ND LAYER ARAMID FIBERS OR OUTER LAYER MOLDED RUBBER, ETHYLENE PROPYLENE |
| OPERATING PRESSURE | 250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM |
| OUTER COVERING ENVIRONMENTAL PROTECTION | HEAT RESISTANT |
| MEASURING METHOD AND LENGTH | 1500.000 INCHES NOMINAL WORKING |
| MINIMUM INSIDE BENDING RADIUS | 7.500 INCHES |
| NOMINAL THREAD SIZE | 1.500 INCHES FIRST END |
| NOMINAL THREAD SIZE | 1.500 INCHES SECOND END |
| NONDEFINITIVE SPEC/STD DATA | B TYPE AND 1-1/2 IN. SIZE |
| SPECIAL FEATURES | NONCOLLAPSIBLE |
| SPECIFICATION/STANDARD DATA | 81349-MIL-H-24580/SH/ GOVERNMENT SPECIFICATION |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD DIRECTION | RIGHT-HAND SECOND END |
| THREAD SERIES DESIGNATOR | NPSH FIRST END |
| THREAD SERIES DESIGNATOR | NPSH SECOND END |