| STYLE DESIGNATOR | FIXED |
| DIAMETER | 7.216 INCHES MINIMUM AND |
| 7.218 INCHES MAXIMUM |
| LENGTH | 7.190 INCHES MINIMUM AND |
| 7.280 INCHES MAXIMUM |
| HOUSING INSIDE DIAMETER | 7.190 INCHES MINIMUM AND |
| 7.280 INCHES MAXIMUM |
| QUANTITY | 1 |
| MATERIAL | MAGNESIUM ALLOY BLADE |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-M-56 FED SPEC SINGLE MATERIAL RESPONSE BLADE |
| SURFACE TREATMENT | DICHROMATE AND |
| PRIMER AND |
| LACQUER BLADE |
| DRIVE TYPE | DIRECT |
| ROTATION DIRECTION FOR WHICH DESIGNED | COUNTERCLOCKWISE |
| PRIME MOVER TYPE | ELECTRIC MOTOR |
| PRIME MOVER DRIVE SHAFT BEARING TYPE | BALL |
| ELECTRICAL CONNECTION TYPE | WIRE LEAD |
| PRIME MOVER POWER RATING | 2.750 HORSEPOWER |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 11400.0 |
| VOLTAGE IN VOLTS AND CURRENT TYPE | 200.0 AC |
| PHASE | THREE |
| FREQUENCY IN HERTZ | 400.0 |
| AIR FLOW RATE | 901.000 CUBIC FEET PER MINUTE NOMINAL |
| STATIC PRESSURE AT SPECIFIED AIR FLOW RATE | 12.0 INCHES OF WATER |
| FLOW DIRECTION | INWARD |
| STAGE QUANTITY | 1 |
| MOUNTING FACILITY TYPE AND QUANTITY | 1 FLANGE AND |
| 8 UNTHREADED HOLE |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY SOURCE CONTROL DWG NO. 114E4041-2,FSCM 77272 |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 77272 |
| MFR SOURCE CONTROLLING REFERENCE | 114E4041-2 |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 55820 |
| DESIGN CONTROL REFERENCE | 500702-5310 |