1640-00-273-9279 TERMINAL,WIRE ROPE,STUD,AVIATION Index 2530-00-273-9281 CUP,HYDRAULIC BRAKE CYLINDER

National Stock Number:
4030-00-273-9279

Federal Supply Class:
4030

National Item Identification Number:
002739279

Description:
TERMINAL,WIRE ROPE,STUD

Detail:
AN ITEM DESIGNED FOR SWAGING TO ANOTHER ITEM AS AN END TERMINATION. ONE END IS A CYLINDRICAL SLEEVE AND THE OPPOSITE END IS AN EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION IS OF ONE NOMINAL DIAMETER; ITS UNTHREADED PORTION MAY BE OF ANY SHAPE OR SIZE. FOR ITEMS SPECIFICALLY DESIGNED FOR AVIATION, SEE TERMINAL, WIRE ROPE, STUD, AVIATION.


Manufacturer Information:
403000282643183014HARTWELL CORPORATION
403000282643188044AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
666-10RH62060SOUTHCO INC.
666-10RH83014HARTWELL CORPORATION
AN666-10RH88044AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
403000282643196906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-DTL-78181349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
AN66610R88044AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
AN666F10RH88044AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
MIL-DTL-78196906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS21259-10RH96906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
ACCOMMODATED MATERIAL DIAMETER0.313 INCHES NOMINAL
BREAKING STRENGTH9800.0 POUNDS MINIMUM
HOLE DIAMETER0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM
INSIDE DIAMETER0.328 INCHES MINIMUM AND 0.333 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-DTL-781 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIALSTEEL COMP 303SE AND STEEL COMP 305
NOMINAL THREAD SIZE0.500 INCHES
OVERALL LENGTH5.828 INCHES MINIMUM AND 5.844 INCHES MAXIMUM
PLAIN SHANK DIAMETER0.630 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
PLAIN SHANK LENGTH2.938 INCHES MINIMUM AND 3.000 INCHES MAXIMUM
STYLE DESIGNATORTHREADED
SURFACE TREATMENTPASSIVATE
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH2.000 INCHES MINIMUM AND 2.063 INCHES MAXIMUM
THREAD QUANTITY PER INCH20
THREAD SERIES DESIGNATORUNF
UNDERCUT DIAMETER0.467 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
WIDTH ACROSS FLATS0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us