|
|
|
National Stock Number:
3416-01-385-3998
Federal Supply Class:
3416
National Item Identification Number:
013853998
Description:
LATHE,ENGINE
|
Manufacturer Information:
| 582-1PP | 0PJX3 | DOALL INDUSTRIAL SUPPLY | | BRM500582A | 0PJX3 | DOALL INDUSTRIAL SUPPLY | | EMMAX-ACC | 0PJX3 | DOALL INDUSTRIAL SUPPLY | | MAXIMAT SUPER 11 | 0PJX3 | DOALL INDUSTRIAL SUPPLY |
|
Techincal Specification:
| ACCESSORY COMPONENTS AND QUANTITY | 1 VEE-BED; 1 HEADSTOCK; 1 TAILSTOCK; 1 QUICK CHANGE GEAR BOX; 1 LONGITUDINAL CROSS AND TOP SLIDES; 1 SINGLE TOOLPOST; 1 LEADSCREW; 1 FEED SHAFT; 1 MT5 CENTER; 1 MT2 CENTER; 1 LATHE DOG; 1 DOG PIN; 1 SET OF WRENCHES; 1 GREASE GUN; 1 INSTRUCTION BOOK AND SERVICE PARTS LIST | | ACTUAL SWING OVER BED | 11.000 INCHES NOMINAL | | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER | | CARRIAGE FEED CHANGE QUANTITY | 15 | | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER | | CARRIAGE QUANTITY | 1 | | CENTER TO CENTER DISTANCE | 25.600 INCHES NOMINAL | | CURRENT TYPE | AC | | DESIGN TYPE | SCREW | | ELECTRIC MOTOR HORSEPOWER RATING | 1.300 | | ELECTRIC MOTOR QUANTITY | 1 | | FREQUENCY IN HERTZ | 60.0 | | HEADSTOCK DRIVE TYPE | DIRECT PULLEY, BACK GEARED OR GEARED HEAD | | HOLLOW SPINDLE HOLE SIZE | 1.400 INCHES NOMINAL | | PERFORMANCE TYPE | LIGHT DUTY | | PHASE | SINGLE | | MOUNTING TYPE | BENCH | | PURPOSE FOR WHICH DESIGNED | TOOLROOM | | RATED SWING | 11.000 INCHES NOMINAL | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | DIFFERENTIATED BY FEAT REQUIREMENTS | | SPINDLE SPEED QUANTITY | 8 | | SPINDLE SPEED RANGE IN RPM | +55.0 TO 2200.0 | | SWING OVER CROSS SLIDE | 6.700 INCHES NOMINAL | | SPECIAL FEATURES | THE FOLLOWING ITEMS ARE AVAILABLE WHEN SPECIFIED; MACHINE LAMP, P/N 533100; 3 JAW SELF-CENTERING CHUCK, P/N V3V746; VERTICAL MILLING AND DRILLING ATTACHMENT, P/N 524.1RB FOR INCH TYPE, P/N 524.1RA FOR METRIC TYPE; 4 JAW SELF-CENTERING CHUCK, P/N V3V748; 3 JAW DRILL CHUCK, P/N 250000; DRILL CHUCK ARBOR MT2, P/N 251000; REVOLVING CENTER MT2, P/N 732000; QUICK-CHANGE TOOLPOST, P/N 583180A; TOOLHOLDER, P/N 583182A; LONGITUDINAL STOP, P/N 584030; BORING BAR HOLDER, P/N 583183A; CUTOFF TOOLHOLDER, P/N 583184A; CUTOFF BLADE, P/N 583600A; KNURLING TOOLHOLDER, P/N 583185A; LATERAL STOP, P/N 548000; THREAD DIAL INDICATOR, P/N 584310; COLLET HOLDER, P/N 584041A; COLLET SET, P/N 586200A; LEVELING PAD SET, P/N 585110; CAMLOCK CHUCK ADAPTOR D1-4, P/N 584010; MILLING TABLE, P/N 565350; MACHINE VISE, P/N 761310; SWIVEL BASE, P/N 761320; STEPPED CLAMPING SHOE, P/N 465100 | | THREAD CHANGE QUANTITY | 15 | | THREAD QUANTITY RANGE | +9.0 TO 64.0 PER INCH | | VOLTAGE IN VOLTS | 115.0 |
|
|