| BORE DIAMETER | 0.7495 INCHES MAXIMUM |
| MATERIAL | STEEL CORROSION RESISTING BEARING |
| ALUMINUM ALLOY 6061 HOUSING |
| STEEL CORROSION RESISTING SEAL |
| SURFACE TREATMENT | CHROMIUM BEARING |
| BASE THICKNESS | 0.3125 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 2.3650 INCHES MINIMUM AND |
| 2.3850 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 3.4900 INCHES MINIMUM AND |
| 3.5100 INCHES MAXIMUM |
| HOUSING HEIGHT | 1.7500 INCHES NOMINAL |
| HOUSING LENGTH | 4.5000 INCHES NOMINAL |
| HOUSING WIDTH | 2.7500 INCHES NOMINAL |
| HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 0.9340 INCHES MINIMUM AND |
| 0.9400 INCHES MAXIMUM |
| MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| MOUNTING HOLE DIAMETER | 0.1875 INCHES NOMINAL |
| LUBRICATION FITTING TYPE | WICK |
| INTERNAL FIT-UP DESIGNATION | STANDARD |
| ROLLING ELEMENT GROOVE QUANTITY | 2 |
| ALIGNMENT TYPE | RIGID |
| BLOCK TYPE | FIXED |
| SHAFT END TYPE | OPEN |
| SEAL TYPE | CONTACT |
| SEAL LOCATION | BOTH ENDS |
| ROTATING ELEMENT LOCKING METHOD | STRAIGHT SLEEVE |
| LOAD CAPABILITY TYPE | RADIAL AND |
| THRUST |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 96881 |
| DESIGN CONTROL REFERENCE | TWN-12-CR |