| BORE DIAMETER | 4.3307 INCHES NOMINAL |
| MATERIAL | STEEL COMP E52100 BEARING SURFACE |
| STEEL HOUSING |
| STEEL SEAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE BEARING SURFACE |
| STYLE DESIGNATOR | PILLOW BLOCK, OPTIONAL SPLIT |
| BASE THICKNESS | 2.0000 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 13.5625 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 2.7500 INCHES NOMINAL |
| HOUSING HEIGHT | 9.7500 INCHES NOMINAL |
| HOUSING LENGTH | 7.0000 INCHES NOMINAL |
| HOUSING WIDTH | 16.5000 INCHES NOMINAL |
| BASE LENGTH | 6.5000 INCHES NOMINAL |
| ASSEMBLY OVERALL LENGTH | 7.0000 INCHES NOMINAL |
| HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 4.9375 INCHES NOMINAL |
| MOUNTING HOLE TYPE | SLOTTED |
| MOUNTING SLOT WIDTH | 0.7500 INCHES NOMINAL |
| MOUNTING SLOT LENGTH | 1.6875 INCHES NOMINAL |
| LUBRICATION MATERIAL | GREASE AND |
| OIL |
| LUBRICATION FITTING TYPE | PIPE PLUG |
| LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 45.0 DEGREES NOMINAL |
| INTERNAL FIT-UP DESIGNATION | STANDARD |
| ROLLING ELEMENT GROOVE QUANTITY | 2 |
| ALIGNMENT TYPE | SELF-ALIGNING |
| BLOCK TYPE | FIXED |
| SHAFT END TYPE | OPEN |
| SEAL TYPE | LABYRINTH |
| SEAL LOCATION | BOTH ENDS |
| ROTATING ELEMENT LOCKING METHOD | STRAIGHT SLEEVE |
| LOAD CAPABILITY TYPE | RADIAL AND |
| THRUST |
| FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |