| BORE CENTER TO SHANK END DISTANCE | 2.020 INCHES MINIMUM AND 2.040 INCHES MAXIMUM |
| BORE DIAMETER | 0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| HARDNESS RATING | |
| INNER MEMBER WIDTH | 0.404 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| KEYWAY DIMENSION | |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629, PH13-8MO COMMERCIAL ITEM DESCRIPTION 10TH MATERIAL RESPONSE BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5630 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE INNER MEMBER |
| MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER |
| MATERIAL | STEEL COMP 440C INNER MEMBER |
| MATERIAL | STEEL COMP XM-13 BODY |
| OUTER MEMBER WIDTH | 0.317 INCHES MINIMUM AND 0.327 INCHES MAXIMUM |
| OUTER MEMBER OUTSIDE DIAMETER | 1.121 INCHES MINIMUM AND 1.141 INCHES MAXIMUM |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BEARING, PLAIN ROD END, SELF ALIGNING, SELF LUBRICATING, NARROW, EXTERNALLY THREADED, STEEL, CORROSION RESISTANT (CRES), NEGATIVE 65 DEGREES TO POSITIVE 325 DEGREES F. |
| SHANK STYLE | EXTERNALLY THREADED |
| SHANK THREAD LENGTH | 1.156 INCHES MINIMUM AND 1.218 INCHES MAXIMUM |
| SPECIFICATION/STANDARD DATA | 0U583-SAE AS81935 NATIONAL STD/SPEC |
| STYLE DESIGNATOR | BALL TYPE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | |
| SURFACE TREATMENT | UNABLE TO DECODE |
| THREAD CLASS | 3A |
| THREAD DIAMETER | 0.375 INCHES NOMINAL |
| THREAD DIRECTION | LEFT-HAND |
| THREAD QUANTITY PER INCH | 24 |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |