|
|
|
National Stock Number:
3120-01-624-1369
Federal Supply Class:
3120
National Item Identification Number:
016241369
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| EW081601 | 71366 | BUNTING BEARINGS CORP |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | DIAMETER | 0.502 INCHES MINIMUM AND 0.506 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE 30 ASSN STD SINGLE MATERIAL RESPONSE LUBRICATION | | MATERIAL | BRONZE OVERALL | | MATERIAL | OIL LUBRICATING LUBRICATION | | OUTSIDE DIAMETER | 0.999 INCHES MINIMUM AND 1.009 INCHES MAXIMUM | | OVERALL THICKNESS | 0.062 INCHES NOMINAL | | SPECIAL FEATURES | MIN OPERATING TEMP 10 DEGREES F, MAX 220 DEGREES F | | SPECIFICATION/STANDARD DATA | 81343-SAE 841 MANUFACTURERS STANDARD | | STYLE DESIGNATOR | ROUND |
|
|