| BORE DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| BORE CENTER TO SHANK END DISTANCE | 2.4280 INCHES MINIMUM AND 2.4480 INCHES MAXIMUM |
| HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM RACE INSERT |
| HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY |
| HARDNESS RATING | 55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER |
| INNER MEMBER WIDTH | 0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE INNER MEMBER |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RACE INSERT |
| OVERALL LENGTH | 3.0915 INCHES MINIMUM AND 3.1215 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER |
| MATERIAL | STEEL COMP 440C INNER MEMBER |
| MATERIAL | STEEL COMP 630 RACE INSERT |
| MATERIAL | STEEL COMP E4340 ROD END BODY |
| OUTER MEMBER WIDTH | 0.5100 INCHES MINIMUM AND 0.5150 INCHES MAXIMUM |
| OUTER MEMBER OUTSIDE DIAMETER | 1.3270 INCHES MINIMUM AND 1.3470 INCHES MAXIMUM |
| SHANK STYLE | EXTERNALLY THREADED |
| SHANK THREAD LENGTH | 1.4370 INCHES MINIMUM AND 1.4990 INCHES MAXIMUM |
| SPECIAL FEATURES | KEYWAY IN SHANK 0.093 IN. MIN WIDE 0.098 IN. MAX WIDE; 0.060 IN. MIN DEEP 0.065 IN. MAX DEEP; SURFACE FINISH ON BALL PASSIVATE PER MIL-S-5002 OPTIONAL |
| SPECIFICATION/STANDARD DATA | 81349-MIL-B-81935/1A GOVERNMENT SPECIFICATION |
| STATIC RADIAL LOAD RATING | 19500 POUNDS |
| STYLE DESIGNATOR | BALL TYPE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY |
| SURFACE TREATMENT | CADMIUM AND CHROMATE ROD END BODY |
| THREAD CLASS | 3A |
| THREAD DIAMETER | 0.500 INCHES NOMINAL |
| THREAD DIRECTION | LEFT-HAND |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| THREAD QUANTITY PER INCH | 20 |