3110-01-265-2144 CAM FOLLOWER,NEEDLE BEARING Index 3120-01-265-2146 BUSHING,SLEEVE

National Stock Number:
3120-01-265-2145

Federal Supply Class:
3120

National Item Identification Number:
012652145

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.


Manufacturer Information:
2007125-113002GOODRICH CORPORATION
2007125-117576GOODRICH CORP DBA GOODRICH CORP
2007125-16K4C8GOODRICH CORPORATION
3120PL06891619009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH


Techincal Specification:
ANTIROTATION/LUBRICATION TYPE AND QUANTITY8 HOLE AND 8 SLOT
BODY INSIDE DIAMETER3.1865 INCHES MINIMUM AND 3.1877 INCHES MAXIMUM
BODY OUTSIDE DIAMETER3.9880 INCHES MINIMUM AND 3.9900 INCHES MAXIMUM
CORNER SHAPECHAMFERED OUTSIDE LEFT CORNER
CORNER SHAPEROUND INSIDE LEFT CORNER
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
CRITICALITY CODE JUSTIFICATIONADAS AND FEAT
HOLE DIAMETER0.0930 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM FIRST
LUBRICANT ACCOMMODATION STYLEGROOVED CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4640 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4880 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALCOPPER ALLOY 630 OVERALL
PROPRIETARY CHARACTERISTICSPACS
OVERALL LENGTH2.2500 INCHES NOMINAL
SLOT WIDTH0.1200 INCHES NOMINAL FIRST
SPECIAL FEATURESINSIDE DIA COUNTERBORE LEFT END 3.6000 IN. DIA,0.5300 IN. DEEP; MUST MAINTAIN A TIGHT FIT TOLERANCE
STYLE DESIGNATORSOLID, PLAIN, NO OUTSIDE FLANGES
SURFACE GROOVE LOCATION AND QUANTITY3 EXTERNAL AND 1 INTERNAL
SURFACE FINISH32.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH32.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us