| MATERIAL | STEEL COMP E52100 INNER MEMBER |
| STEEL COMP 301 OR |
| STEEL COMP 302 OR |
| STEEL COMP 302B OR |
| STEEL COMP 303 OR |
| STEEL COMP 303SE OR |
| STEEL COMP 304 OR |
| STEEL COMP 304L OR |
| STEEL COMP 305 OR |
| STEEL COMP 309 OR |
| STEEL COMP 310 OR |
| STEEL COMP 316 OR |
| STEEL COMP 316L OR |
| STEEL COMP 317 OR |
| STEEL COMP 321 OR |
| STEEL COMP 347 OR |
| STEEL COMP 440C RACE INSERT |
| STEEL COMP 1010 OR |
| STEEL COMP 1012 OR |
| STEEL COMP 1015 OR |
| STEEL COMP 1016 OR |
| STEEL COMP 1017 OR |
| STEEL COMP 1018 OR |
| STEEL COMP 1019 OR |
| STEEL COMP 1020 OR |
| STEEL COMP 1021 OR |
| STEEL COMP 1022 OR |
| STEEL COMP 1023 OR |
| STEEL COMP 1025 OR |
| STEEL COMP 1026 OR |
| STEEL COMP 1029 OR |
| STEEL COMP 1030 ROD END BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE OR |
| AMS-6440 ASSN STD SINGLE MATERIAL RESPONSE INNER MEMBER |
| ASTM A108 ASSN STD ALL MATERIAL RESPONSES OR |
| ASTMA 576 ASSN STD ALL MATERIAL RESPONSES ROD END BODY |
| HARDNESS RATING | 57.0 ROCKWELL C MINIMUM AND |
| 63.0 ROCKWELL C MAXIMUM INNER MEMBER |
| SURFACE TREATMENT | CHROMIUM INNER MEMBER |
| ZINC AND |
| CHROMATE OR |
| CADMIUM OR |
| CADMIUM AND |
| CHROMATE ROD END BODY |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE INNER MEMBER |
| QQ-Z-325,TYPE 1 OR 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OR |
| QQ-P-416,TYPE 1 OR 2,CLASS 3 FED SPEC 2ND TREATMENT RESPONSE ROD END BODY |
| STYLE DESIGNATOR | BALL TYPE |
| OVERALL LENGTH | 2.3100 INCHES NOMINAL |
| BORE DIAMETER | 0.3120 INCHES MINIMUM AND |
| 0.3140 INCHES MAXIMUM |
| OUTER MEMBER OUTSIDE DIAMETER | 0.8600 INCHES MINIMUM AND |
| 1.0000 INCHES MAXIMUM |
| BORE CENTER TO SHANK END DISTANCE | 1.8430 INCHES MINIMUM AND |
| 1.9070 INCHES MAXIMUM |
| OUTER MEMBER WIDTH | 0.3220 INCHES MINIMUM AND |
| 0.3480 INCHES MAXIMUM |
| INNER MEMBER WIDTH | 0.4320 INCHES MINIMUM AND |
| 0.4370 INCHES MAXIMUM |
| STATIC RADIAL LOAD RATING | 2500 POUNDS |
| SHANK STYLE | EXTERNALLY THREADED |
| SHANK THREAD LENGTH | 1.0620 INCHES MINIMUM |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD DIAMETER | 0.3125 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 24 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| SPECIAL FEATURES | RACE INSERT DRY FILM LUBRICANT PER MIL-L-8937 |