| BORE CENTER TO SHANK END DISTANCE | 4.1150 INCHES MINIMUM AND 4.1350 INCHES MAXIMUM |
| BORE DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM OUTER RING |
| HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY |
| HARDNESS RATING | 55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER |
| INNER MEMBER WIDTH | 1.3730 INCHES MINIMUM AND 1.3750 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE INNER MEMBER |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| OVERALL LENGTH | 5.5125 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER |
| MATERIAL | STEEL COMP 440C INNER MEMBER |
| MATERIAL | STEEL COMP 630 OUTER RING |
| MATERIAL | STEEL COMP E4340 ROD END BODY |
| OUTER MEMBER OUTSIDE DIAMETER | 2.7650 INCHES MINIMUM AND 2.7850 INCHES MAXIMUM |
| OUTER MEMBER WIDTH | 1.0100 INCHES MINIMUM AND 1.0200 INCHES MAXIMUM |
| SHANK STYLE | EXTERNALLY THREADED |
| SHANK THREAD LENGTH | 2.3120 INCHES MINIMUM AND 2.3740 INCHES MAXIMUM |
| SPECIAL FEATURES | KEYWAY IN SHANK 0.093 IN. MIN WIDE 0.098 IN. MAX WIDE; 0.060 IN. MIN DEEP 0.065 IN. MAX DEEP; SURFACE FINISH ON BALL PASSIVATE PER MIL-S-5002 OPTIONAL |
| SPECIFICATION/STANDARD DATA | 81349-MIL-B-81935/1A GOVERNMENT SPECIFICATION |
| STYLE DESIGNATOR | BALL TYPE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY |
| SURFACE TREATMENT | CADMIUM AND CHROMATE ROD END BODY |
| THREAD CLASS | 3A |
| THREAD DIAMETER | 1.250 INCHES NOMINAL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| THREAD QUANTITY PER INCH | 12 |