3120-01-239-4674, BEARING,PLAIN,ROD END

National Stock Number:
3120-01-239-4674

Federal Supply Class:
3120

National Item Identification Number:
012394674

Description:
BEARING,PLAIN,ROD END

Detail:
A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. It is used to carry a load and to reduce sliding friction. It does not employ rolling elements. The outer member of the assembly is modified to provide a shank. The inner member may be either a plain spherical bearing or a sleeve bearing. Excludes BEARING, PLAIN, SPHERICAL and BEARING, PLAIN, SELF-ALIGNING.

Manufacturer Information:

3-3006-12	45402	MEGGITT SAFETY SYSTEMS, INC.
3-3006-12	70236	TACTAIR FLUID CONTROLS INC

Techincal Specification:

BORE CENTER TO SHANK END DISTANCE	2.0310 INCHES NOMINAL
BORE DIAMETER	0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM
HARDNESS RATING	28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM RACE INSERT
HARDNESS RATING	55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER
INNER MEMBER WIDTH	0.3410 INCHES MINIMUM AND 0.3430 INCHES MAXIMUM
LUBRICATION FEATURE	SELF-LUBRICATING LINER RACE LINER
OUTER MEMBER OUTSIDE DIAMETER	0.9380 INCHES NOMINAL
OUTER MEMBER WIDTH	0.2450 INCHES MINIMUM AND 0.2550 INCHES MAXIMUM
OVERALL LENGTH	2.5000 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE INNER MEMBER
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RACE INSERT
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE ROD END BODY
MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER
MATERIAL	STEEL COMP 630 ROD END BODY
MATERIAL	STEEL COMP 630 RACE INSERT
MATERIAL	STEEL COMP 440C INNER MEMBER
SHANK STYLE	EXTERNALLY THREADED
SHANK THREAD LENGTH	1.3000 INCHES NOMINAL
SPECIAL FEATURES	KEYWAY IN THD SHANK
STATIC RADIAL LOAD RATING	6040 POUNDS
STYLE DESIGNATOR	BALL TYPE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE INNER MEMBER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY
SURFACE TREATMENT	PASSIVATE INNER MEMBER
SURFACE TREATMENT	PASSIVATE ROD END BODY
TEST DATA DOCUMENT	81349-MIL-I-6866,TYPE 1 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD CLASS	3A
THREAD DIAMETER	0.375 INCHES NOMINAL
THREAD DIRECTION	RIGHT-HAND
THREAD QUANTITY PER INCH	24
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

Click here to Register for Free 30-day Trial