|
|
|
National Stock Number:
3120-01-203-6563
Federal Supply Class:
3120
National Item Identification Number:
012036563
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 1061-06 | 56425 | INTERNATIONAL SWITCHBOARD CORP DIV OF EQUUS POWER SYSTEMS CORP | | 1061-06 | 62514 | ELECTRO MARINE INDUSTRIES INC |
|
Techincal Specification:
| MATERIAL | COPPER ALLOY 230 OR | | COPPER ALLOY 240 OR | | COPPER ALLOY 260 OR | | COPPER ALLOY 268 OR | | COPPER ALLOY 342 OR | | COPPER ALLOY 353 OR | | COPPER ALLOY 262 OR | | COPPER ALLOY 270 OR | | COPPER ALLOY 272 OR | | COPPER ALLOY 274 OR | | COPPER ALLOY 280 OR | | COPPER ALLOY 330 OR | | COPPER ALLOY 331 OR | | COPPER ALLOY 332 OR | | COPPER ALLOY 335 OR | | COPPER ALLOY 340 OR | | COPPER ALLOY 344 OR | | COPPER ALLOY 345 OR | | COPPER ALLOY 347 OR | | COPPER ALLOY 348 OR | | COPPER ALLOY 350 OR | | COPPER ALLOY 356 OR | | COPPER ALLOY 360 OR | | COPPER ALLOY 370 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-613 FED SPEC ALL MATERIAL RESPONSES OVERALL | | STYLE DESIGNATOR | ROUND | | OUTSIDE DIAMETER | 2.2500 INCHES NOMINAL | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | OVERALL THICKNESS | 0.1250 INCHES NOMINAL | | SURFACE CONDITION | GROUND | | SPECIAL FEATURES | THREE HOLES THRU FACES,0.188 IN. DIA,COUNTERSUNK 100 DEG TO 0.344 IN. DIA; ID IS 0.188 IN. OFF CENTER,1.062 IN. NOM DIA |
|
|