3120-01-190-2254, BUSHING,SLEEVE

National Stock Number:
3120-01-190-2254

Federal Supply Class:
3120

National Item Identification Number:
011902254

Description:
BUSHING,SLEEVE

Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.

Manufacturer Information:

SUM3596

K5294

GE AVIATION SYSTEMS LIMITED

Techincal Specification:

BODY INSIDE DIAMETER	0.2506 INCHES MINIMUM AND 0.2510 INCHES MAXIMUM
CORNER SHAPE	SQUARE CENTER FLANGE LEFT BODY CORNER
CORNER SHAPE	SQUARE CENTER FLANGE OUTSIDE LEFT CORNER
CORNER SHAPE	SQUARE CENTER FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPE	SQUARE INSIDE LEFT CORNER
CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
CORNER SHAPE	SQUARE INSIDE RIGHT CORNER
CORNER SHAPE	SQUARE OUTSIDE RIGHT CORNER
CORNER SHAPE	UNDERCUT CENTER FLANGE RIGHT BODY CORNER
END TO FLANGE DISTANCE	0.0400 INCHES NOMINAL
FLANGE OUTSIDE DIAMETER	1.8600 INCHES NOMINAL
FLANGE WIDTH	0.0600 INCHES NOMINAL
LEFT END BODY DIAMETER	0.6250 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	BS 970 325S21,FSCM K5294 MFR REF SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL CORROSION RESISTING OVERALL
PROPRIETARY CHARACTERISTICS	PACS
OVERALL LENGTH	0.4000 INCHES NOMINAL
RIGHT END BODY DIAMETER	0.5012 INCHES MINIMUM AND 0.5016 INCHES MAXIMUM
SPECIAL FEATURES	LEFT END INSIDE DIA COUNTERSUNK 0.285 IN. DIA BY 90.0 DEG; RIGHT END INSIDE DIA COUNTERBORED 0.315 IN. DIA,0.100 IN. DEEP; OUTSIDE DIA OF FLANGE MILLED FLAT ON TWO SIDES TO 0.750 IN. WIDE; LOWER RIGHT CORNER OF FLANGE NOTCHED 0.430 IN. BELOW HORIZONTAL CENTER LINE,0.220 IN. FROM VERTICAL CENTERLINE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	0722-568,FSCM K5294 MFR REF SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL

Click here to Register for Free 30-day Trial