3120-01-175-7018, BEARING,WASHER,THRUST

3120-01-175-7017 BEARING,PLAIN,SELF-ALIGNING

4010-01-175-7020 WIRE ROPE ASSEMBLY,SINGLE LEG

National Stock Number:
3120-01-175-7018

Federal Supply Class:
3120

National Item Identification Number:
011757018

Description:
BEARING,WASHER,THRUST

Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.

Manufacturer Information:

A42932

10988

CNH INDUSTRIAL AMERICA LLC

Techincal Specification:

DIAMETER	3.4570 INCHES MINIMUM AND 3.4770 INCHES MAXIMUM
CENTER HOLE SHAPE STYLE	ROUND
CORNER SHAPE	CHAMFERED FIRST INSIDE CORNER
CORNER SHAPE	CHAMFERED FIRST OUTSIDE CORNER
CORNER SHAPE	SQUARE SECOND INSIDE CORNER
CORNER SHAPE	SQUARE SECOND OUTSIDE CORNER
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
LUBRICATION FEATURE	GROOVE OUTER LAYER
MATERIAL DOCUMENT AND CLASSIFICATION	MB-8,FSCM 99267 MFR REF SINGLE MATERIAL RESPONSE OUTER LAYER
MATERIAL DOCUMENT AND CLASSIFICATION	SAE ASSN STD SINGLE MATERIAL RESPONSE INNER LAYER
MATERIAL	ALUMINUM OUTER LAYER
MATERIAL	STEEL COMP 1010 INNER LAYER
PROPRIETARY CHARACTERISTICS	PACS
OUTSIDE DIAMETER	4.4900 INCHES MINIMUM AND 4.5100 INCHES MAXIMUM
OVERALL THICKNESS	0.1900 INCHES MINIMUM AND 0.1920 INCHES MAXIMUM
SPECIAL FEATURES	CONSISTS OF ONE-HALF SEGMENT (180.0 DEG) ONLY
STYLE DESIGNATOR	ROUND

Click here to Register for Free 30-day Trial