| MATERIAL | STEEL COMP 440C INNER MEMBER |
| STEEL COMP 630 RACE INSERT |
| STEEL COMP 630 ROD END BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | 97613,17-4PH CRES,COND-1150 MFR REF 2ND MATERIAL RESPONSE RACE INSERT |
| 97613,17-4PH CRES,COND-1025 MFR REF 1ST MATERIAL RESPONSE ROD END BODY |
| HARDNESS RATING | 55.0 ROCKWELL C NOMINAL INNER MEMBER |
| SURFACE TREATMENT | LUBRICANT DRY FILM INNER MEMBER |
| STYLE DESIGNATOR | BALL TYPE |
| OVERALL LENGTH | 1.8595 INCHES NOMINAL |
| BORE DIAMETER | 0.2495 INCHES MINIMUM AND |
| 0.2515 INCHES MAXIMUM |
| OUTER MEMBER OUTSIDE DIAMETER | 0.7710 INCHES MINIMUM AND |
| 0.7910 INCHES MAXIMUM |
| BORE CENTER TO SHANK END DISTANCE | 1.4590 INCHES MINIMUM AND |
| 1.4790 INCHES MAXIMUM |
| OUTER MEMBER WIDTH | 0.3370 INCHES MINIMUM AND |
| 0.3470 INCHES MAXIMUM |
| INNER MEMBER WIDTH | 0.4320 INCHES MINIMUM AND |
| 0.4370 INCHES MAXIMUM |
| STATIC RADIAL LOAD RATING | 4200 POUNDS |
| SHANK STYLE | INTERNALLY THREADED W/HEXAGON END AND INSPECTION HOLE |
| SHANK THREAD LENGTH | 0.7500 INCHES NOMINAL |
| INSPECTION HOLE CENTER TO END DISTANCE | 0.3750 INCHES NOMINAL |
| SHANK WIDTH ACROSS WRENCH FLATS | 0.4370 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD DIAMETER | 0.3125 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 24 |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| SPECIAL FEATURES | LOCK WASHER SLOT IN SHANK |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 97613 |
| DESIGN CONTROL REFERENCE | KB4CRWD1 |