|
|
|
National Stock Number:
3120-01-156-8763
Federal Supply Class:
3120
National Item Identification Number:
011568763
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 24241413 | 7X677 | GENERAL MOTORS LLC | | 3120PL0742208 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 8624196 | 11862 | GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT | | 5740348 | 34623 | AM GENERAL LLC | | 8624196 | 7X677 | GENERAL MOTORS LLC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1005 OR | | STEEL COMP 1015 INNER LAYER | | COPPER ALLOY OUTER LAYER | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD ALL MATERIAL RESPONSES INNER LAYER | | SAE 799 ASSN STD SINGLE MATERIAL RESPONSE OUTER LAYER | | HARDNESS RATING | 72.0 ROCKWELL SUPERFICIAL 15-T MINIMUM OVERALL | | STYLE DESIGNATOR | ROUND | | OUTSIDE DIAMETER | 1.7800 INCHES NOMINAL | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | OVERALL THICKNESS | 0.0600 INCHES MINIMUM AND | | 0.0640 INCHES MAXIMUM | | CENTER HOLE SHAPE STYLE | ROUND | | DIAMETER | 1.2880 INCHES MINIMUM AND | | 1.2980 INCHES MAXIMUM | | SURFACE CONDITION | GROUND | | LUBRICATION FEATURE | GROOVE LEFT SIDE | | GROOVE RIGHT SIDE | | SPECIAL FEATURES | 4 GROOVES EACH SIDE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 7X677 | | DESIGN CONTROL REFERENCE | 24241413 |
|
|