3120-01-100-8417, BUSHING,SLEEVE

5935-01-100-8418 CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
3120-01-100-8417

Federal Supply Class:
3120

National Item Identification Number:
011008417

Description:
BUSHING,SLEEVE

Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.

Manufacturer Information:

414DS120-7	77272	THE BOEING COMPANY
ATLF08-126D	15860	NEW HAMPSHIRE BALL BEARINGS INC

Techincal Specification:

MATERIAL	STEEL INNER LAYER
	PLASTIC OUTER LAYER
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5659 ASSN STD SINGLE MATERIAL RESPONSE INNER LAYER
	414DS120-7,77272 MFR REF SINGLE MATERIAL RESPONSE OUTER LAYER
HARDNESS RATING	34.0 ROCKWELL C MINIMUM AND
	38.0 ROCKWELL C MAXIMUM OVERALL
SURFACE TREATMENT	PASSIVATE INNER LAYER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	BAC 5751,81205 MFR REF SINGLE TREATMENT RESPONSE INNER LAYER
STYLE DESIGNATOR	SOLID, EXTERNAL FLANGE
OVERALL LENGTH	0.6770 INCHES MINIMUM AND
	0.6820 INCHES MAXIMUM
BODY OUTSIDE DIAMETER	0.6410 INCHES MINIMUM AND
	0.6420 INCHES MAXIMUM
BODY INSIDE DIAMETER	0.5000 INCHES MINIMUM AND
	0.5015 INCHES MAXIMUM
FLANGE OUTSIDE DIAMETER	1.2500 INCHES NOMINAL
FLANGE WIDTH	0.0450 INCHES MINIMUM AND
	0.0500 INCHES MAXIMUM
END TO FLANGE DISTANCE	0.0520 INCHES MINIMUM AND
	0.0570 INCHES MAXIMUM
LEFT END BODY DIAMETER	0.7400 INCHES MINIMUM AND
	0.7600 INCHES MAXIMUM
RIGHT END BODY DIAMETER	0.6410 INCHES MINIMUM AND
	0.6420 INCHES MAXIMUM
CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
	SQUARE OUTSIDE RIGHT CORNER
	SQUARE INSIDE RIGHT CORNER
	SQUARE INSIDE LEFT CORNER
	ROUND CENTER FLANGE LEFT BODY CORNER
	SQUARE CENTER FLANGE RIGHT BODY CORNER
	SQUARE CENTER FLANGE OUTSIDE LEFT CORNER
	SQUARE CENTER FLANGE OUTSIDE RIGHT CORNER
SURFACE FINISH	63.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
	125.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE
SPECIAL FEATURES	LINER OD OF BODY AND RIGHT SIDE OF FLANGE BONDING AGENT AND LINER SHALLNOT BE AFFECTED BY MIL-H-5606/MIL-H-83282 HYDRAULIC FLUID
TEST DATA DOCUMENT	81205-BAC-5424 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
SPEC/STD CONTROLLING DATA
MANUFACTURERS CODE	77272
MFR SOURCE CONTROLLING REFERENCE	414DS120-7

Click here to Register for Free 30-day Trial