3120-01-100-8411, BUSHING,SLEEVE

National Stock Number:
3120-01-100-8411

Federal Supply Class:
3120

National Item Identification Number:
011008411

Description:
BUSHING,SLEEVE

Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.

Manufacturer Information:

414DS120-8	77272	THE BOEING COMPANY
ATLF10-109D	15860	NEW HAMPSHIRE BALL BEARINGS INC

Techincal Specification:

BODY INSIDE DIAMETER	0.6267 INCHES MINIMUM AND 0.6272 INCHES MAXIMUM
BODY OUTSIDE DIAMETER	0.7660 INCHES MINIMUM AND 0.7670 INCHES MAXIMUM
CORNER SHAPE	SQUARE INSIDE LEFT CORNER
CORNER SHAPE	SQUARE INSIDE RIGHT CORNER
CORNER SHAPE	SQUARE OUTSIDE RIGHT CORNER
CORNER SHAPE	SQUARE LEFT FLANGE BODY CORNER
CORNER SHAPE	SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
FLANGE OUTSIDE DIAMETER	1.5000 INCHES NOMINAL
FLANGE WIDTH	0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM
HARDNESS RATING	34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	77272414DS120-8 MFR REF SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH	0.6320 INCHES MINIMUM AND 0.6420 INCHES MAXIMUM
MATERIAL	PLASTIC TETRAFLUOROETHYLENE OUTER LAYER
MATERIAL	STEEL CORROSION RESISTING INNER LAYER
SPECIAL FEATURES	LINER OD OF BODY AND RIGHT SIDE OF FLANGE BONDING AGENT AND LINER SHALLNOT BE AFFECTED BY MIL-H-5606/MIL-H-83282 HYDRAULIC FLUID,FLAT ON OD OF FLANGE
STYLE DESIGNATOR	SOLID, EXTERNAL FLANGE ONE END
SURFACE FINISH	125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH	63.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	812055751 MFR REF SINGLE TREATMENT RESPONSE INTERMEDIATE LAYER
SURFACE TREATMENT	PASSIVATE INTERMEDIATE LAYER
TEST DATA DOCUMENT	81205-BAC-5424 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

Click here to Register for Free 30-day Trial