3120-01-025-7152, BEARING,SLEEVE

National Stock Number:
3120-01-025-7152

Federal Supply Class:
3120

National Item Identification Number:
010257152

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.

Manufacturer Information:

FB-1012-8

71041

ALTRA INDUSTRIAL MOTION CORP.

Techincal Specification:

	SQUARE INSIDE RIGHT CORNER
	SQUARE INSIDE LEFT CORNER
	SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
	SQUARE LEFT FLANGE BODY CORNER
LUBRICATION MATERIAL	LUBRICATING OIL
TEST DATA DOCUMENT	81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
SPECIAL TEST FEATURES	SPECIAL QUALITY CONTROL TESTING
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS	AS DIFFERENTIATED BY PACKAGING IN ACCORDANCE WITH MIL-P-21399 AND MATERIAL CONFORMING TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL TESTING
THE MANUFACTURERS DATA
MANUFACTURERS CODE	71041
DESIGN CONTROL REFERENCE	FB-1012-8
MATERIAL	COPPER ALLOY OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-B-5697,TY 1,COMP A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
STYLE DESIGNATOR	SOLID, EXTERNAL FLANGE ONE END
OVERALL LENGTH	0.9950 INCHES MINIMUM AND
	1.0050 INCHES MAXIMUM
BODY OUTSIDE DIAMETER	0.7520 INCHES MINIMUM AND
	0.7530 INCHES MAXIMUM
BODY INSIDE DIAMETER	0.6250 INCHES MINIMUM AND
	0.6260 INCHES MAXIMUM
FLANGE OUTSIDE DIAMETER	0.9975 INCHES MINIMUM AND
	1.0025 INCHES MAXIMUM
FLANGE WIDTH	0.1225 INCHES MINIMUM AND
	0.1275 INCHES MAXIMUM
CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
	SQUARE OUTSIDE RIGHT CORNER

Click here to Register for Free 30-day Trial