| MATERIAL | COPPER ALLOY INNER LAYER |
| STEEL COMP 302 OUTER LAYER |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-682 FED SPEC SINGLE MATERIAL RESPONSE OUTER LAYER |
| STYLE DESIGNATOR | HALF SLEEVE, EXTERNAL FLANGES BOTH ENDS |
| OVERALL LENGTH | 4.7480 INCHES MINIMUM AND |
| 4.7500 INCHES MAXIMUM |
| BODY OUTSIDE DIAMETER | 8.0005 INCHES MINIMUM AND |
| 8.0010 INCHES MAXIMUM |
| BODY INSIDE DIAMETER | 7.2260 INCHES MINIMUM AND |
| 7.2280 INCHES MAXIMUM |
| LEFT FLANGE OUTSIDE DIAMETER | 8.4950 INCHES MINIMUM AND |
| 8.5050 INCHES MAXIMUM |
| RIGHT FLANGE OUTSIDE DIAMETER | 8.4950 INCHES MINIMUM AND |
| 8.5050 INCHES MAXIMUM |
| LEFT FLANGE WIDTH | 0.3090 INCHES MINIMUM AND |
| 0.3100 INCHES MAXIMUM |
| RIGHT FLANGE WIDTH | 0.3090 INCHES MINIMUM AND |
| 63.0 MICROINCHES LEFT END SURFACE OF RIGHT FLANGE |
| 63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY |
| 63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF RIGHT FLANGE |
| 63.0 MICROINCHES RIGHT END SURFACE OF BODY AND FLANGE |
| 63.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE |
| LUBRICATION MATERIAL | LUBRICATING OIL |
| 0.3100 INCHES MAXIMUM |
| CORNER SHAPE | SQUARE ALL CORNERS |
| ANTIROTATION/LUBRICATION TYPE AND QUANTITY | 4 HOLE |
| HOLE DIAMETER | 0.3125 INCHES NOMINAL FIRST |
| DISTANCE FROM CENTERLINE OF OPENING TO LEFT END OF BEARING | 2.0625 INCHES NOMINAL FIRST |
| HOLE SPACING ANGLE | 10.0 DEGREES NOMINAL |
| SURFACE FINISH | 16.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY |
| 63.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE |
| LUBRICANT ACCOMMODATION STYLE | GROOVED CIRCULAR |
| SURFACE GROOVE LOCATION AND QUANTITY | 1 INTERNAL |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 55380 |
| DESIGN CONTROL REFERENCE | 3268461 |