|
|
|
National Stock Number:
3120-00-915-8526
Federal Supply Class:
3120
National Item Identification Number:
009158526
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 7986523 | 19206 | ARMY, UNITED STATES DEPARTMENT OF THE BUSINESS DEVELOPMENT DBA WATERVLIET ARSENAL | | DU104 | 26124 | GGB LLC | | SW-0104 | 26124 | GGB LLC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CORNER SHAPE | SQUARE ALL CORNERS | | CRITICALITY CODE JUSTIFICATION | ADUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | DIAMETER | 4.4300 INCHES MINIMUM AND 4.4500 INCHES MAXIMUM | | OVERALL THICKNESS | 0.0895 INCHES MINIMUM AND 0.0915 INCHES MAXIMUM | | MATERIAL | COPPER ALLOY INTERMEDIATE LAYER | | MATERIAL | PLASTIC INNER LAYER | | MATERIAL | STEEL COMP 1010 OUTER LAYER | | OUTSIDE DIAMETER | 4.9200 INCHES MINIMUM AND 4.9300 INCHES MAXIMUM | | STYLE DESIGNATOR | ROUND |
|
|