3120-00-915-6059 BEARING,ROD END Index 1560-00-915-6061 FLOOR,AIRCRAFT

National Stock Number:
3120-00-915-6060

Federal Supply Class:
3120

National Item Identification Number:
009156060

Description:
BUSHING,SLEEVE

Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.


Manufacturer Information:
204-040-790-00197499BELL TEXTRON INC
204-040-790-197499BELL TEXTRON INC


Techincal Specification:
BODY INSIDE DIAMETER1.0800 INCHES MINIMUM AND 1.1000 INCHES MAXIMUM
BODY OUTSIDE DIAMETER1.3755 INCHES MINIMUM AND 1.3760 INCHES MAXIMUM
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE LEFT FLANGE BODY CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
FLANGE OUTSIDE DIAMETER1.7750 INCHES MINIMUM AND 1.7950 INCHES MAXIMUM
FLANGE WIDTH0.1400 INCHES MINIMUM AND 0.1800 INCHES MAXIMUM
HARDNESS RATING32.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM EXTERNAL SURFACE MEMBER
HARDNESS RATING32.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM INTERNAL SURFACES
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6260 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH0.4900 INCHES MINIMUM AND 0.5100 INCHES MAXIMUM
MATERIALSTEEL COMP E9310 OVERALL
RIGHT INTERNAL FLANGE HOLE DIAMETER0.5620 INCHES MINIMUM AND 0.5630 INCHES MAXIMUM
RIGHT INTERNAL FLANGE WIDTH0.1500 INCHES MINIMUM AND 1.3000 INCHES MAXIMUM
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END, INTERNAL FLANGE ONE END
SURFACE FINISH125.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
SURFACE FINISH125.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF BODY
SURFACE FINISH32.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
SURFACE FINISH32.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION204-040-790-1,97499 MFR REF SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTOXIDE OVERALL
TEST DATA DOCUMENT97499-BPSFW4084 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us