4930-00-871-6087 FILTER UNIT,FLUID,PRESSURE Index 3120-00-871-6089 BEARING,SLEEVE

National Stock Number:
3120-00-871-6088

Federal Supply Class:
3120

National Item Identification Number:
008716088

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.


Manufacturer Information:
101-035944940CUMMINS POWER GENERATION INC.
101B35944940CUMMINS POWER GENERATION INC.
101C033844940CUMMINS POWER GENERATION INC.
MILE1127681349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
5222296046CRANE PUMPS & SYSTEMS PFT CORP
3120008716088SCY13E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
QPL1127697403CECOM LR CENTER


Techincal Specification:
ANTIROTATION/LUBRICATION TYPE AND QUANTITY2 HOLE
BODY INSIDE DIAMETER2.2430 INCHES MINIMUM AND 2.2435 INCHES MAXIMUM
BODY OUTSIDE DIAMETER2.4365 INCHES MINIMUM AND 2.4375 INCHES MAXIMUM
CORNER SHAPECHAMFERED OUTSIDE LEFT CORNER
CORNER SHAPECHAMFERED OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPESQUARE INSIDE RIGHT CORNER
HOLE DIAMETER0.2031 INCHES NOMINAL FIRST
LUBRICANT ACCOMMODATION STYLEGROOVED CIRCULAR
OVERALL LENGTH1.0570 INCHES MINIMUM AND 1.0670 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONSAE 794 ASSN STD SINGLE MATERIAL RESPONSE OR 799/D ASSN STD SINGLE MATERIAL RESPONSE INNER LAYER
MATERIALCOPPER ALLOY INNER LAYER
MATERIALOIL LUBRICATING LUBRICATION
MATERIALSTEEL COMP 1010 OUTER LAYER
STYLE DESIGNATORSOLID, PLAIN, NO OUTSIDE FLANGES
SURFACE GROOVE LOCATION AND QUANTITY1 INTERNAL


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us