| DISTANCE FROM LUG END TO END OF BEARING | 0.3535 INCHES MINIMUM AND 0.3630 INCHES MAXIMUM |
| ANTIROTATION/LUBRICATION TYPE AND QUANTITY | 1 HOLE |
| BODY INSIDE DIAMETER | 1.6275 INCHES MINIMUM AND 1.6282 INCHES MAXIMUM |
| BODY OUTSIDE DIAMETER | 1.7545 INCHES MINIMUM AND 1.7560 INCHES MAXIMUM |
| CORNER SHAPE | ROUND INSIDE LEFT CORNER |
| CORNER SHAPE | ROUND INSIDE RIGHT CORNER |
| CORNER SHAPE | ROUND LEFT FLANGE OUTSIDE RIGHT CORNER |
| CORNER SHAPE | ROUND OUTSIDE LEFT CORNER |
| CORNER SHAPE | ROUND OUTSIDE RIGHT CORNER |
| CORNER SHAPE | SQUARE RIGHT FLANGE BODY CORNER |
| CORNER SHAPE | SQUARE RIGHT FLANGE OUTSIDE LEFT CORNER |
| CORNER SHAPE | SQUARE LEFT FLANGE BODY CORNER |
| HOLE DIAMETER | 0.2400 INCHES MINIMUM AND 0.2600 INCHES MAXIMUM FIRST |
| HOLE SPACING ANGLE | 28.0 DEGREES NOMINAL |
| LEFT FLANGE OUTSIDE DIAMETER | 2.3140 INCHES MINIMUM AND 2.3740 INCHES MAXIMUM |
| LEFT FLANGE WIDTH | 0.0810 INCHES MINIMUM AND 0.0830 INCHES MAXIMUM |
| LOCKING LUG HEIGHT | 0.0450 INCHES MINIMUM AND 0.0550 INCHES MAXIMUM |
| LOCKING LUG LENGTH | 0.1900 INCHES MINIMUM AND 0.2200 INCHES MAXIMUM |
| LOCKING LUG WIDTH | 0.1750 INCHES MINIMUM AND 0.1800 INCHES MAXIMUM |
| LUBRICANT ACCOMMODATION STYLE | GROOVED CIRCULAR |
| OVERALL LENGTH | 1.1905 INCHES MINIMUM AND 1.1925 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | FED-STD-66 FED STD 2ND MATERIAL RESPONSE OUTER LAYER |
| MATERIAL DOCUMENT AND CLASSIFICATION | MS13826-1,96906 MFR REF 1ST MATERIAL RESPONSE INNER LAYER |
| MATERIAL | COPPER ALLOY INNER LAYER |
| MATERIAL | OIL LUBRICATING LUBRICATION |
| MATERIAL | STEEL OUTER LAYER |
| RIGHT FLANGE OUTSIDE DIAMETER | 2.3140 INCHES MINIMUM AND 2.3740 INCHES MAXIMUM |
| RIGHT FLANGE WIDTH | 0.0810 INCHES MINIMUM AND 0.0830 INCHES MAXIMUM |
| STYLE DESIGNATOR | HALF SLEEVE, EXTERNAL FLANGES BOTH ENDS |
| SURFACE GROOVE LOCATION AND QUANTITY | 1 INTERNAL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MS13826-1,96906 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | TIN OVERALL |