3120-00-867-1316, BEARING,WASHER,THRUST

National Stock Number:
3120-00-867-1316

Federal Supply Class:
3120

National Item Identification Number:
008671316

Description:
BEARING,WASHER,THRUST

Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.

Manufacturer Information:

772A501-1	01289	GENERAL ELECTRIC COMPANY
772A501-1	24446	GENERAL ELECTRIC COMPANY

Techincal Specification:

CENTER HOLE KEYWAY DEPTH	0.1410 INCHES NOMINAL
CENTER HOLE KEYWAY QUANTITY	1
CENTER HOLE KEYWAY WIDTH	0.2810 INCHES NOMINAL
CENTER HOLE SHAPE STYLE	ROUND W/KEYWAY
CORNER SHAPE	CHAMFERED FIRST INSIDE CORNER
CORNER SHAPE	CHAMFERED SECOND INSIDE CORNER
CORNER SHAPE	SQUARE FIRST OUTSIDE CORNER
CORNER SHAPE	SQUARE SECOND OUTSIDE CORNER
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
DIAMETER	1.2810 INCHES NOMINAL
FEATURES PROVIDED	CASEHARDENED
OUTSIDE DIAMETER	3.2500 INCHES NOMINAL
OVERALL THICKNESS	0.4290 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A576 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM 675 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL OVERALL
SPECIAL FEATURES	FIRST INSIDE CORNER CHAMFER ANGLE 45.0 DEGREES,FIRST INSIDE CORNER CHAMFER LENGTH 0.0620
STYLE DESIGNATOR	ROUND
SURFACE FINISH	125.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH	125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH	32.0 MICROINCHES LEFT END SURFACE OF BODY
SURFACE FINISH	32.0 MICROINCHES RIGHT END SURFACE OF BODY

Click here to Register for Free 30-day Trial