3120-00-758-9356, BEARING,SLEEVE

National Stock Number:
3120-00-758-9356

Federal Supply Class:
3120

National Item Identification Number:
007589356

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.

Manufacturer Information:

A51G10589-13	26512	NORTHROP GRUMMAN SYSTEMS CORPORATION
A51G10589-13	61174	NORTHROP GRUMMAN SYSTEMS CORPORATION
A51G10589-13	79RG9	NORTHROP GRUMMAN SYSTEMS CORPORATION

Techincal Specification:

TEST DATA DOCUMENT	81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THE MANUFACTURERS DATA
MANUFACTURERS CODE	61174
DESIGN CONTROL REFERENCE	A51G10589-13
MATERIAL	COPPER ALLOY 955 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-C-390 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
STYLE DESIGNATOR	SOLID, EXTERNAL FLANGE ONE END
OVERALL LENGTH	0.6450 INCHES MINIMUM AND
	0.6560 INCHES MAXIMUM
BODY OUTSIDE DIAMETER	1.6895 INCHES MINIMUM AND
	1.6905 INCHES MAXIMUM
BODY INSIDE DIAMETER	1.4930 INCHES MINIMUM AND
	1.4950 INCHES MAXIMUM
FLANGE OUTSIDE DIAMETER	2.1200 INCHES MINIMUM AND
	2.1300 INCHES MAXIMUM
FLANGE WIDTH	0.1200 INCHES MINIMUM AND
	0.1250 INCHES MAXIMUM
CORNER SHAPE	CHAMFERED OUTSIDE LEFT CORNER
	SQUARE OUTSIDE RIGHT CORNER
	SQUARE INSIDE RIGHT CORNER
	SQUARE INSIDE LEFT CORNER
	SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
	SQUARE LEFT FLANGE BODY CORNER
SURFACE FINISH	125.0 MICROINCHES OVERALL
LUBRICANT ACCOMMODATION STYLE	GROOVED OPEN BOTH ENDS
SURFACE GROOVE LOCATION AND QUANTITY	1 INTERNAL

Click here to Register for Free 30-day Trial