3120-00-737-5135, BEARING,WASHER,THRUST

National Stock Number:
3120-00-737-5135

Federal Supply Class:
3120

National Item Identification Number:
007375135

Description:
BEARING,WASHER,THRUST

Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.

Manufacturer Information:

642191	34623	AM GENERAL LLC
7375135	19207	U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
884W	34623	AM GENERAL LLC
884W	72447	DANA COMMERCIAL VEHICLE MANUFACTURING, LLC

Techincal Specification:

CENTER HOLE KEYWAY QUANTITY	3
CENTER HOLE KEYWAY RADIUS	0.3125 INCHES NOMINAL
CENTER HOLE SHAPE STYLE	ROUND W/ROUND KEYWAYS
COUNTERBORE DIAMETER	1.6250 INCHES NOMINAL
CORNER SHAPE	SQUARE INSIDE LEFT CORNER
CORNER SHAPE	SQUARE INSIDE RIGHT CORNER
CORNER SHAPE	SQUARE OUTSIDE RIGHT CORNER
CORNER SHAPE	SQUARE LEFT FLANGE BODY CORNER
CORNER SHAPE	SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
COUNTERBORE DEPTH	0.0350 INCHES MINIMUM AND 0.0410 INCHES MAXIMUM
CROSS-SECTIONAL SHAPE STYLE	COUNTERBORED
LUBRICATION FEATURE	GROOVE FLAT BEARING SURFACE
MAJOR DIAMETER	1.4062 INCHES NOMINAL
OVERALL THICKNESS	0.0910 INCHES MINIMUM AND 0.0930 INCHES MAXIMUM
MATERIAL	COPPER ALLOY 510 INNER LAYER
MATERIAL	COPPER ALLOY 544 OVERALL
MATERIAL	OIL LUBRICATING LUBRICATION
MATERIAL	STEEL OUTER LAYER
MINOR DIAMETER	1.1406 INCHES NOMINAL
OUTSIDE DIAMETER	2.5000 INCHES NOMINAL
SPECIAL FEATURES	KEY 7/32 IN. W BY 5/16 IN. LG BENT 3/32 IN. MIN,1/8 IN. MAX,AWAY FROM BRONZE SURFACE OF WASHER,BEND STARTS 1/8 IN. FROM OD,PARALLEL TO AND EQUALLY SPACED BETWEEN GROOVES
STYLE DESIGNATOR	ROUND

Click here to Register for Free 30-day Trial