2835-00-707-8238 BAFFLE,OIL PUMP DRIVE SHAFT,GEAR Index 2835-00-707-8245 COVER ASSEMBLY,OIL PUMP

National Stock Number:
3120-00-707-8241

Federal Supply Class:
3120

National Item Identification Number:
007078241

Description:
BEARING,WASHER,THRUST

Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.


Manufacturer Information:
3612837-12N935BOEING DISTRIBUTION SERVICES X, INC.
3612837-170210HONEYWELL INTERNATIONAL INC.
7327670210HONEYWELL INTERNATIONAL INC.
7327672599ALLIEDSIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO
7327699193HONEYWELL INTERNATIONAL INC.
3612837-199193HONEYWELL INTERNATIONAL INC.


Techincal Specification:
CENTER HOLE KEY BOTTOM RADIUS0.0100 INCHES MINIMUM AND 0.0150 INCHES MAXIMUM
CENTER HOLE KEY LENGTH0.0760 INCHES MINIMUM AND 0.0790 INCHES MAXIMUM
CENTER HOLE KEY QUANTITY2
CENTER HOLE KEY WIDTH0.0700 INCHES MINIMUM AND 0.0760 INCHES MAXIMUM
CENTER HOLE SHAPE STYLEROUND W/KEY
CORNER SHAPESQUARE FIRST INSIDE CORNER
CORNER SHAPESQUARE FIRST OUTSIDE CORNER
CORNER SHAPESQUARE FOURTH OUTSIDE CORNER
CORNER SHAPESQUARE SECOND INSIDE CORNER
CORNER SHAPESQUARE SECOND OUTSIDE CORNER
CORNER SHAPESQUARE THIRD OUTSIDE CORNER
CROSS-SECTIONAL SHAPE STYLESHOULDERED
DIAMETER0.4710 INCHES MINIMUM AND 0.4770 INCHES MAXIMUM
FLANGE THICKNESS0.0850 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM
OUTSIDE DIAMETER1.1200 INCHES MINIMUM AND 1.1300 INCHES MAXIMUM
OVERALL THICKNESS0.1800 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM
SHANK OUTSIDE DIAMETER0.6160 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM
STYLE DESIGNATORROUND
SURFACE TREATMENTCADMIUM OVERALL


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us