3120-00-562-0129 BEARING,SLEEVE Index 3120-00-562-0131 BEARING,SLEEVE

National Stock Number:
3120-00-562-0130

Federal Supply Class:
3120

National Item Identification Number:
005620130

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.


Manufacturer Information:
52059702978RENK AMERICA LLC
869883819207U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM


Techincal Specification:
ANTIROTATION/LUBRICATION TYPE AND QUANTITY1 HOLE
BODY INSIDE DIAMETER1.3700 INCHES MINIMUM AND 1.5700 INCHES MAXIMUM
BODY OUTSIDE DIAMETER1.7500 INCHES MINIMUM AND 1.7510 INCHES MAXIMUM
CORNER SHAPERELIEF GROOVE LEFT FLANGE BODY CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
FLANGE OUTSIDE DIAMETER2.2400 INCHES MINIMUM AND 2.2600 INCHES MAXIMUM
FLANGE WIDTH0.1100 INCHES MINIMUM AND 0.1300 INCHES MAXIMUM
HARDNESS RATING65.0 ROCKWELL F NOMINAL OVERALL
HOLE DIAMETER0.1855 INCHES MINIMUM AND 0.1915 INCHES MAXIMUM FIRST
LUBRICANT ACCOMMODATION STYLEGROOVED CLOSED BOTH ENDS AND GROOVED CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALCOPPER ALLOY 937 OVERALL
OVERALL LENGTH1.6100 INCHES MINIMUM AND 1.6300 INCHES MAXIMUM
SPECIAL FEATURESFOUR SLOTS IN FLANGE FACE 0.1600 IN. WIDE BY 0600 IN. DEEP
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END
SURFACE GROOVE LOCATION AND QUANTITY2 INTERNAL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us