5330-00-516-2067 SEAL,ENGINE Index 4730-00-516-2076 EXPANSION JOINT,PIPE

National Stock Number:
3120-00-516-2074

Federal Supply Class:
3120

National Item Identification Number:
005162074

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.


Manufacturer Information:
118338-00406481NORTHROP GRUMMAN SYSTEMS CORPORATION
309-0079-0015280NORTHROP GRUMMAN SYSTEMS CORPORATION DIV ES DEFENSIVE SYSTEMS DIVISION
57A5A84-302387NAVAL AIR WARFARE CENTER AIRCRAFT DIV
57A5A84-310001NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
309-0123-0095105ROCKWELL COLLINS, INC.
309-0123-00095105ROCKWELL COLLINS, INC.
F347MILL608512204DAIMLER CHRYSLER
F347VMILL6085A70417CHRYSLER CORP AMPLEX DIV
FE47MILL608570417CHRYSLER CORP AMPLEX DIV
MILB568781349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
BODY INSIDE DIAMETER0.1875 INCHES MINIMUM AND 0.1885 INCHES MAXIMUM
BODY OUTSIDE DIAMETER0.3585 INCHES MINIMUM AND 0.3595 INCHES MAXIMUM
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE LEFT FLANGE BODY CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
FLANGE OUTSIDE DIAMETER0.4662 INCHES MINIMUM AND 0.4712 INCHES MAXIMUM
FLANGE WIDTH0.0287 INCHES MINIMUM AND 0.0337 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-B-5697,TY 1,COMP A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALCOPPER ALLOY OVERALL
MATERIALOIL LUBRICATING LUBRICATION
NONDEFINITIVE SPEC/STD DATA1 TYPE AND A COMPOSITION
OVERALL LENGTH0.1660 INCHES MINIMUM AND 0.1760 INCHES MAXIMUM
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us