5315-00-410-5809 PIN,STRAIGHT,HEADED Index 4935-00-410-5814 RATE TABLE ASSEMBLY

National Stock Number:
3120-00-410-5810

Federal Supply Class:
3120

National Item Identification Number:
004105810

Description:
BUSHING,SLEEVE

Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.


Manufacturer Information:
10560169-318876U S ARMY AVIATION AND MISSILE COMMAND


Techincal Specification:
BODY INSIDE DIAMETER0.4760 INCHES NOMINAL
BODY OUTSIDE DIAMETER0.2621 INCHES MINIMUM AND 0.6256 INCHES MAXIMUM
CORNER SHAPECHAMFERED LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPECHAMFERED OUTSIDE RIGHT CORNER
CORNER SHAPEROUND LEFT FLANGE BODY CORNER
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
FLANGE OUTSIDE DIAMETER1.1080 INCHES MINIMUM AND 1.1180 INCHES MAXIMUM
FLANGE WIDTH0.0950 INCHES MINIMUM AND 0.1050 INCHES MAXIMUM
HARDNESS RATING47.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 440A OVERALL
OVERALL LENGTH0.6900 INCHES NOMINAL
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END, INTERNAL FLANGE ONE END
SURFACE FINISH125.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF BODY
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
SURFACE FINISH125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
SURFACE FINISH63.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SPECIAL FEATURESTWO HOLES 0.094 IN. MIN,0.097 IN. MAX DIA THRU BOTH SIDES OF BODY 0.190 IN. NOM FROM END
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMPD 11889,FSCM 18876 MFR REF SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTANODIZE OVERALL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us