|
|
|
National Stock Number:
3120-00-407-4375
Federal Supply Class:
3120
National Item Identification Number:
004074375
Description:
BEARING,PLAIN,ROD END
Detail:
A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. It is used to carry a load and to reduce sliding friction. It does not employ rolling elements. The outer member of the assembly is modified to provide a shank. The inner member may be either a plain spherical bearing or a sleeve bearing. Excludes BEARING, PLAIN, SPHERICAL and BEARING, PLAIN, SELF-ALIGNING.
|
Manufacturer Information:
| 10S04-115W | 16746 | RBC SPECLINE INC | | 51281 | 09455 | RBC TRANSPORT DYNAMICS CORP | | HB4E207 | 02758 | U S BEARINGS | | MXK4PAFG | 73134 | ROLLER BEARING COMPANY OF AMERICA, INC. | | BRE4-2015 | 81376 | RBC SOUTHWEST PRODUCTS, INC. | | KB4ESSFNW | 97613 | SARGENT AEROSPACE & DEFENSE, LLC | | STSKF200CS09 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| BORE CENTER TO SHANK END DISTANCE | 1.5520 INCHES MINIMUM AND 1.5720 INCHES MAXIMUM | | BORE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2515 INCHES MAXIMUM | | FEATURES PROVIDED | FLUSH LUBRICATION FITTING | | INNER MEMBER WIDTH | 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM | | LUBRICATION FEATURE | GROOVE INTERNAL OUTER MEMBER | | MATERIAL | BRONZE AND ALUMINUM OUTER LAYER | | MATERIAL | STEEL COMP 4130 INSIDE DIAMETER SURFACE OF BODY | | MATERIAL | STEEL COMP E52100 INNER MEMBER | | OUTER MEMBER OUTSIDE DIAMETER | 0.7710 INCHES MINIMUM AND 0.7910 INCHES MAXIMUM | | OUTER MEMBER WIDTH | 0.3320 INCHES MINIMUM AND 0.3420 INCHES MAXIMUM | | OVERALL LENGTH | 1.9530 INCHES NOMINAL | | SHANK STYLE | EXTERNALLY THREADED | | SHANK THREAD LENGTH | 0.9690 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM | | SPECIAL FEATURES | KEYWAY IN SHANK | | STATIC RADIAL LOAD RATING | 4500 POUNDS | | STYLE DESIGNATOR | BALL TYPE | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 3A | | THREAD DIAMETER | 0.3120 INCHES NOMINAL | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 3 | | THREAD SERIES DESIGNATOR | UNF |
|
|