| DISTANCE FROM CENTERLINE OF OPENING TO LEFT END OF BEARING | 1.1140 INCHES MINIMUM AND 1.1360 INCHES MAXIMUM FIRST |
| DISTANCE FROM LUG END TO END OF BEARING | 0.4435 INCHES MINIMUM AND 0.4530 INCHES MAXIMUM |
| ANTIROTATION/LUBRICATION TYPE AND QUANTITY | 2 HOLE |
| BODY INSIDE DIAMETER | 2.8764 INCHES MINIMUM AND 2.8794 INCHES MAXIMUM |
| BODY OUTSIDE DIAMETER | 3.0670 INCHES NOMINAL |
| CORNER SHAPE | ROUND RIGHT FLANGE BODY CORNER |
| CORNER SHAPE | ROUND INSIDE LEFT CORNER |
| CORNER SHAPE | ROUND INSIDE RIGHT CORNER |
| CORNER SHAPE | ROUND LEFT FLANGE BODY CORNER |
| CORNER SHAPE | SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER |
| CORNER SHAPE | SQUARE OUTSIDE LEFT CORNER |
| CORNER SHAPE | SQUARE OUTSIDE RIGHT CORNER |
| CORNER SHAPE | SQUARE RIGHT FLANGE OUTSIDE LEFT CORNER |
| HOLE DIAMETER | 0.2400 INCHES MINIMUM AND 0.2600 INCHES MAXIMUM FIRST |
| HOLE SPACING ANGLE | 35.0 DEGREES NOMINAL |
| LEFT FLANGE OUTSIDE DIAMETER | 3.8770 INCHES MINIMUM AND 3.9710 INCHES MAXIMUM |
| LEFT FLANGE WIDTH | 0.1010 INCHES MINIMUM AND 0.1030 INCHES MAXIMUM |
| LOCKING LUG HEIGHT | 0.0450 INCHES MINIMUM AND 0.0550 INCHES MAXIMUM |
| LOCKING LUG LENGTH | 0.1900 INCHES MINIMUM AND 0.2200 INCHES MAXIMUM |
| LOCKING LUG WIDTH | 0.1750 INCHES MINIMUM AND 0.1800 INCHES MAXIMUM |
| LUBRICANT ACCOMMODATION STYLE | GROOVED CIRCULAR |
| OVERALL LENGTH | 2.2490 INCHES MINIMUM AND 2.2510 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OUTER LAYER |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE 49 ASSN STD SINGLE MATERIAL RESPONSE INNER LAYER |
| MATERIAL | COPPER ALLOY INNER LAYER |
| MATERIAL | STEEL COMP 1010 OUTER LAYER |
| RIGHT FLANGE OUTSIDE DIAMETER | 3.8770 INCHES MINIMUM AND 3.9710 INCHES MAXIMUM |
| RIGHT FLANGE WIDTH | 0.1010 INCHES MINIMUM AND 0.1030 INCHES MAXIMUM |
| STYLE DESIGNATOR | HALF SLEEVE, EXTERNAL FLANGES BOTH ENDS |
| SURFACE GROOVE LOCATION AND QUANTITY | 1 INTERNAL |
| SURFACE TREATMENT | TIN OVERALL |