|
|
|
National Stock Number:
3120-00-326-4520
Federal Supply Class:
3120
National Item Identification Number:
003264520
Description:
BEARING,PLAIN,ROD END
Detail:
A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. It is used to carry a load and to reduce sliding friction. It does not employ rolling elements. The outer member of the assembly is modified to provide a shank. The inner member may be either a plain spherical bearing or a sleeve bearing. Excludes BEARING, PLAIN, SPHERICAL and BEARING, PLAIN, SELF-ALIGNING.
|
Manufacturer Information:
| 10-611-313-2 | 16746 | RBC SPECLINE INC | | 51286 | 09455 | RBC TRANSPORT DYNAMICS CORP | | 93-0005-10 | 77896 | REXNORD INDUSTRIES, LLC | | BRE10-2000 | 81376 | RBC SOUTHWEST PRODUCTS, INC. | | AR10E9 | J1011 | MINEBEA MITSUMI INC. | | AR10E9 | S0352 | MINEBEA MITSUMI INC. | | STSKF200CS10 | 02758 | U S BEARINGS | | HB10E206 | 02758 | U S BEARINGS | | STSKF200CS10 | 09455 | RBC TRANSPORT DYNAMICS CORP | | STSKF200CS10 | 16746 | RBC SPECLINE INC | | STSKF200CS10 | 73134 | ROLLER BEARING COMPANY OF AMERICA, INC. | | MXK10PFG | 73134 | ROLLER BEARING COMPANY OF AMERICA, INC. | | STSKF200CS10 | 81376 | RBC SOUTHWEST PRODUCTS, INC. | | KB10ESSFNW | 97613 | SARGENT AEROSPACE & DEFENSE, LLC | | STSKF200CS10 | 97613 | SARGENT AEROSPACE & DEFENSE, LLC | | STSKF200CS10 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| BORE DIAMETER | 0.6245 INCHES MINIMUM AND 0.6265 INCHES MAXIMUM | | BORE CENTER TO SHANK END DISTANCE | 2.6150 INCHES MINIMUM AND 2.6350 INCHES MAXIMUM | | FEATURES PROVIDED | FLUSH LUBRICATION FITTING | | INNER MEMBER WIDTH | 0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM | | OUTER MEMBER OUTSIDE DIAMETER | 1.4900 INCHES MINIMUM AND 1.5100 INCHES MAXIMUM | | OUTER MEMBER WIDTH | 0.5720 INCHES MINIMUM AND 0.5820 INCHES MAXIMUM | | OVERALL LENGTH | 3.3600 INCHES MINIMUM AND 3.3900 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE LUBRICATION | | MATERIAL | GREASE LUBRICATION | | MATERIAL | STEEL COMP 4130 INTERNAL ROD END BODY | | MATERIAL | STEEL COMP E52100 INNER MEMBER | | MATERIAL | STEEL COMP 630 RACE INSERT | | SHANK STYLE | EXTERNALLY THREADED | | SHANK THREAD LENGTH | 1.5930 INCHES MINIMUM AND 1.6870 INCHES MAXIMUM | | SPECIAL FEATURES | KEYWAY IN SHANK FOR STD NAS 513 LOCKWASHER | | STATIC RADIAL LOAD RATING | 16000 POUNDS | | STYLE DESIGNATOR | BALL TYPE | | SURFACE TREATMENT | CADMIUM AND CHROMATE ROD END BODY | | SURFACE TREATMENT | CADMIUM INNER MEMBER | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 3A | | THREAD DIAMETER | 0.625 INCHES NOMINAL | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNF | | THREAD QUANTITY PER INCH | 18 |
|
|