3120-00-139-6519, BUSHING,SLEEVE

National Stock Number:
3120-00-139-6519

Federal Supply Class:
3120

National Item Identification Number:
001396519

Description:
BUSHING,SLEEVE

Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.

Manufacturer Information:

2578611-001A	06848	HONEYWELL INTERNATIONAL INC
2578611-001A	17576	GOODRICH CORP DBA GOODRICH CORP
2578611-001A	55284	HONEYWELL INTERNATIONAL INC.
2578611-001A	6K4C8	GOODRICH CORPORATION
2578611-001A	6Z056	CM MANUFACTURING INC

Techincal Specification:

ANTIROTATION/LUBRICATION TYPE AND QUANTITY	1 HOLE
BODY INSIDE DIAMETER	2.4940 INCHES MINIMUM AND 2.4990 INCHES MAXIMUM
BODY OUTSIDE DIAMETER	2.8100 INCHES NOMINAL
CORNER SHAPE	CHAMFERED INSIDE LEFT CORNER
CORNER SHAPE	CHAMFERED OUTSIDE LEFT CORNER
CORNER SHAPE	CHAMFERED OUTSIDE RIGHT CORNER
CORNER SHAPE	SQUARE INSIDE RIGHT CORNER
CORNER SHAPE	SQUARE LEFT FLANGE BODY CORNER
CORNER SHAPE	SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
FLANGE OUTSIDE DIAMETER	3.2500 INCHES NOMINAL
FLANGE WIDTH	0.1560 INCHES NOMINAL
HOLE DIAMETER	0.0600 INCHES NOMINAL FIRST
OVERALL LENGTH	1.2360 INCHES MINIMUM AND 1.2460 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-C-530,COND AT FED SPEC ALL MATERIAL RESPONSES OVERALL
MATERIAL	COPPER ALLOY 172 OR COPPER ALLOY 173 OVERALL
STYLE DESIGNATOR	SOLID, EXTERNAL FLANGE ONE END
SURFACE GROOVE LOCATION AND QUANTITY	1 EXTERNAL AND 1 INTERNAL
SURFACE FINISH	125.0 MICROINCHES INTERMEDIATE LAYER
SURFACE TREATMENT	CADMIUM LEFT END SURFACE OF BODY AND FLANGE
SURFACE TREATMENT	CADMIUM OUTSIDE DIAMETER SURFACE OF BODY
SURFACE TREATMENT	CADMIUM OUTSIDE DIAMETER SURFACE OF FLANGE
SURFACE TREATMENT	CADMIUM RIGHT END SURFACE OF BODY
SURFACE TREATMENT	CADMIUM RIGHT END SURFACE OF LEFT FLANGE
TEST DATA DOCUMENT	81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

Click here to Register for Free 30-day Trial