3110-00-138-4898 BEARING,BALL,ANNULAR Index 3110-00-138-4900 BALL,BEARING

National Stock Number:
3120-00-138-4899

Federal Supply Class:
3120

National Item Identification Number:
001384899

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.


Manufacturer Information:
103-2016-01677896REXNORD INDUSTRIES, LLC
KDJ16C016-24197613SARGENT AEROSPACE & DEFENSE, LLC
MS21241-16C01696906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
BODY INSIDE DIAMETER1.0005 INCHES MINIMUM AND 1.0015 INCHES MAXIMUM
BODY OUTSIDE DIAMETER1.1893 INCHES MINIMUM AND 1.1898 INCHES MAXIMUM
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
CORNER SHAPEUNDERCUT LEFT FLANGE BODY CORNER
FLANGE OUTSIDE DIAMETER1.7300 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM
FLANGE WIDTH0.0575 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM
HARDNESS RATING27.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OUTER LAYER
OVERALL LENGTH0.5475 INCHES MINIMUM AND 0.5625 INCHES MAXIMUM
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER
MATERIALSTEEL COMP 410 AND STEEL COMP 416 OUTER LAYER
SPECIAL FEATURESPLASTIC /TETRAFLUOROETHYLENE/ LINER BONDED TO LEFT FLANGE FACE
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF BODY
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
SURFACE FINISH125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
SURFACE FINISH63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us