|
|
|
National Stock Number:
3120-00-132-4983
Federal Supply Class:
3120
National Item Identification Number:
001324983
Description:
BEARING,PLAIN,ROD END
Detail:
A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. It is used to carry a load and to reduce sliding friction. It does not employ rolling elements. The outer member of the assembly is modified to provide a shank. The inner member may be either a plain spherical bearing or a sleeve bearing. Excludes BEARING, PLAIN, SPHERICAL and BEARING, PLAIN, SELF-ALIGNING.
|
Manufacturer Information:
| 206-001-054 | 97499 | BELL TEXTRON INC | | 206-001-054-1 | 09455 | RBC TRANSPORT DYNAMICS CORP | | 206-001-054-1 | 15860 | NEW HAMPSHIRE BALL BEARINGS INC | | 206-001-054-1 | 21335 | TIMKEN CO | | 206-001-054-1 | 3NPS1 | RBC AIRCRAFT PRODUCTS, INC. | | 206-001-054-1 | 73134 | ROLLER BEARING COMPANY OF AMERICA, INC. | | 51191 | 09455 | RBC TRANSPORT DYNAMICS CORP | | ARB3E35 | 15860 | NEW HAMPSHIRE BALL BEARINGS INC | | 3E35 | 15860 | NEW HAMPSHIRE BALL BEARINGS INC | | REM6AZN8 | 21335 | TIMKEN CO | | REM6AZN8 | 3NPS1 | RBC AIRCRAFT PRODUCTS, INC. | | HMX3B | 73134 | ROLLER BEARING COMPANY OF AMERICA, INC. | | 206-001-054-1 | 97499 | BELL TEXTRON INC | | 206-001-054-1 | 99528 | RADIAL BEARING CORPORATION | | REMX3-2D | 99528 | RADIAL BEARING CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL INNER MEMBER | | COPPER ALLOY RACE INSERT | | STEEL ROD END BODY | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE INNER MEMBER | | QQ-C-465 FED SPEC SINGLE MATERIAL RESPONSE RACE INSERT | | MIL-S-6728 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY | | HARDNESS RATING | 59.0 ROCKWELL C NOMINAL INNER MEMBER | | 34.0 ROCKWELL C NOMINAL ROD END BODY | | SURFACE TREATMENT | CHROMIUM INNER MEMBER | | CADMIUM ROD END BODY | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE INNER MEMBER | | QQ-P-416,TYPE 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY | | STYLE DESIGNATOR | BALL TYPE | | OVERALL LENGTH | 1.2680 INCHES MINIMUM AND | | 1.3110 INCHES MAXIMUM | | BORE DIAMETER | 0.1895 INCHES MINIMUM AND | | 0.1915 INCHES MAXIMUM | | OUTER MEMBER OUTSIDE DIAMETER | 0.5420 INCHES MINIMUM AND | | 0.5620 INCHES MAXIMUM | | BORE CENTER TO SHANK END DISTANCE | 0.9700 INCHES MINIMUM AND | | 1.0300 INCHES MAXIMUM | | OUTER MEMBER WIDTH | 0.1770 INCHES MINIMUM AND | | 0.1970 INCHES MAXIMUM | | INNER MEMBER WIDTH | 0.2450 INCHES MINIMUM AND | | 0.2500 INCHES MAXIMUM | | LUBRICATION MATERIAL | LUBRICATING OIL, SAE 40 | | STATIC RADIAL LOAD RATING | 2890 POUNDS | | SHANK STYLE | EXTERNALLY THREADED | | SHANK THREAD LENGTH | 0.5900 INCHES MINIMUM AND | | 0.6000 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF | | THREAD DIAMETER | 0.250 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 28 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | SPECIAL FEATURES | LUBRICATION GROOVE FORMED BY TWO PIECE RACE INSERT | | TEST DATA DOCUMENT | 81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND | | 81349- MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|