3120-00-006-4809, BEARING,SLEEVE

National Stock Number:
3120-00-006-4809

Federal Supply Class:
3120

National Item Identification Number:
000064809

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.

Manufacturer Information:

1303-2016-020	77896	REXNORD INDUSTRIES, LLC
KDJ16C020-241	97613	SARGENT AEROSPACE & DEFENSE, LLC
MS21241-16C020	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

BODY INSIDE DIAMETER	1.0005 INCHES MINIMUM AND 1.0015 INCHES MAXIMUM
BODY OUTSIDE DIAMETER	1.1893 INCHES MINIMUM AND 1.1898 INCHES MAXIMUM
CORNER SHAPE	SQUARE OUTSIDE RIGHT CORNER
CORNER SHAPE	SQUARE INSIDE LEFT CORNER
CORNER SHAPE	SQUARE INSIDE RIGHT CORNER
CORNER SHAPE	SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
CORNER SHAPE	UNDERCUT LEFT FLANGE BODY CORNER
FLANGE OUTSIDE DIAMETER	1.7300 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM
FLANGE WIDTH	0.0575 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM
HARDNESS RATING	27.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OUTER LAYER
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5643 ASSN STD 1ST MATERIAL RESPONSE OR AISI 410 ASSN STD 2ND MATERIAL RESPONSE OR AISI 416 ASSN STD 3RD MATERIAL RESPONSE INNER LAYER
MATERIAL	STEEL COMP 630 OR STEEL COMP 410 INNER LAYER
OVERALL LENGTH	0.6725 INCHES MINIMUM AND 0.6875 INCHES MAXIMUM
SPECIAL FEATURES	PLASTIC/POLYTETRAFLUOROETHYLENE/ LINER BONDED TO LEFT END SURFACE OF FLANGE
STYLE DESIGNATOR	SOLID, EXTERNAL FLANGE ONE END

Click here to Register for Free 30-day Trial