| MATERIAL | STEEL COMP 440C BALL |
| STEEL COMP 440C INNER RING |
| STEEL COMP 440C OUTER RING |
| PLASTIC POLYTETRAFLUOROETHYLENE SPACER |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE BALL |
| QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE INNER RING |
| QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| STYLE DESIGNATOR | COUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING |
| OVERALL WIDTH | 0.3020 INCHES MINIMUM AND |
| 0.3120 INCHES MAXIMUM |
| BORE DIAMETER | 0.4998 INCHES MINIMUM AND |
| 0.5000 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 0.7428 INCHES MINIMUM AND |
| 0.7500 INCHES MAXIMUM |
| LUBRICATION MATERIAL | GREASE |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | ROYCO 27 GREASE.10-15 PERCENT CAPACITY MFR REF SINGLE MATERIAL RESPONSE |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 5P |
| SURFACE FINISH | GROUND |
| SEAL QUANTITY | 2 |
| BEARING SEAL TYPE | CONTACT |
| LOAD DIRECTION | ANGULAR |
| CONTACT ANGLE | 18.00 DEGREES NOMINAL |
| SPECIAL FEATURES | BEARING PRELOAD POUNDS, MIN 1,MAX 5 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BEARING,BALL,ANNULAR,ANGULAR CONTACT DUPLEX PAIR,FACE TO FACE |